Installation of the system on flat roof with installation frame Sola-Aqua 3K can easily be installed on flat roofs or on the ground with a screw-mounted aluminium frame.

 Installation of the storage tank under the roof: the storage tank can also be

installed under a slope roof with sufficient space

System with vertical store on flat roof or inside the roof Sola-Aqua 3K by Sola-Aqua is also supplied with vertical store which is particularly recommendable for larger installation.

1. Sola-Aqua absorber.

2. Storage tank.

3. Cold water inlet –  pressure-free.

4. Flow and return of

    the solar cycle.

5. Electric heating

(optional)

6. Installation frame - fixing for roof  installation.

7.  Mixers

8. Consumption sites

Sola-Aqua 3K: Robust

Sola-Aqua 3K:  low price, economic, compact size, robust, ecologically friendly.

Increase your quality of life and convenience by heating your water with Thermosphonic solar water heater by Sola-Aqua, using free-of-charge, pollution free solar energy.

Sola-Aqua 3K operates in a pressure-free cycle using the force of gravity.

No circulation pump or control necessary. This very compact system

Consists of only two components: Sola-Aqua HDPE Absorber and isolated storage tank. Quick and easy installation on or in the roof and all around your house.

Complete installation kit with clamp-screw fixing for the absorber cycle, mounting frame for installation on flat roofs or fixing kits for mounting on slope roofs, electric heating module optional. Components are available separately for use in larger installations.

Low pressure drop - approx. 0.003 bar at 200l/h/m2.

Working pressure - up to 0,6 bar

Weight - approx. 6 kg/m2 - water content 6 l/m2

Testing pressure - 4.5 bar at NT

Efficiency - up to approx. 85% - power up to 0.85 kWh/m2

Average value - 0,5 - 0,6 kWh/m2

Idling proof - Temperature-resistant from -50°C to +115°C

Moulded in one piece, homogeneous black. Full-area through flow, freeze-proof, non-corroding, walkable.

Solar heating system with Sola-Aqua panels from HDPE. and storage tank from steel galvanized, pressure less system, no pump and no electronic regulation necessary.

Complete Kits:

Sola-Aqua panels, storage tank from steel galvanized, isolation PU 50 mm, electric heater, hose couplings and black pipes HDPE with quick release joints for solar circuit forward and return

Part.N°:

200120

Set 120 L with 120 L storage tank, 2 Sola-Aqua absorbers SA3 couplings and pipes.

200202

Set 200 L with 200 L storage tank, Sola-Aqua absorbers SA3 couplings and pipes.

Accessories:

Frame for Sola-Aqua panels and tank for installation of the system on flat roofs or on the ground.

Part No.

200102

for Set 200120 - 120 L

Part No.

200103

for Set 200202 - 200 L

If there is a slipping roof, the storage tank can often be installed inside the roof. Set for fastening the Sola-Aqua panels on slipping roofs, with hooks from stainless steel, pipe clips, fastening pipe 1/2" from steel galvanized, band galvanized with screws.

Part No.

200402

For Set 200120 - 120 L - 2 Sola-Aqua Absorber SA3

For Set 200203 - 200 L -Sola-Aqua Absorber SA3

Part No.

200403